Skip to contentSkip to conversation

Change in openvpn[master]: GHA: Maintenance update January 2026

Openvpn-devel In review flichtenheld (Code Review) 2 participants 6 messages Jan 7 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): gerrit.1767796244000.I637cc37f82d96a7d15738cc39523664777714e97@...2715...

#1 lore raw

Attention is currently required from: plaisthos.

Hello plaisthos,

I'd like you to do a code review.
Please visit

    http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email

to review the following change.

Change subject: GHA: Maintenance update January 2026
......................................................................

GHA: Maintenance update January 2026

Includes the following renovate changes:
- chore(deps): update dependency aws/aws-lc to v1.66.2
- Update lukka/get-cmake action to v4.2.1
- chore(deps): update github actions
- chore(deps): update vcpkg digest to eeb00f1

Change-Id I637cc37f82d96a7d15738cc39523664777714e97

---
M .github/workflows/build.yaml
M .github/workflows/coverity-scan.yml
M .github/workflows/doxygen.yml

3 files changed, 31 insertions(+), 31 deletions(-)

git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/55/1455/1

.github/workflows/build.yaml +27 -27
index 11c2d65..d1322c7 100644
@@ -14,12 +14,12 @@
           sudo apt update && sudo apt install -y python3-pip
           pip3 install pre-commit
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Run clang-format
         run: pre-commit run -a --show-diff-on-failure || true
       - name: Check for changes
         run: git diff --output=format-changes.patch
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: format-changes.patch
           path: format-changes.patch
@@ -44,12 +44,12 @@
       VCPKG_INSTALLED_DIR: ${{ github.workspace }}/vcpkg/installed
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+        uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
       - name: Install dependencies
         run: ${VCPKG_ROOT}/vcpkg install openssl lz4 cmocka
       - name: configure OpenVPN with cmake
@@ -78,13 +78,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y mingw-w64 unzip build-essential wget python3-docutils man2html-base
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Restore from cache and install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/mingw/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest
@@ -94,7 +94,7 @@
           buildPreset: mingw-${{ matrix.arch }}
           buildPresetAdditionalArgs: "['--config ${{ matrix.build }}']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}
           path: |
@@ -102,7 +102,7 @@
             ${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/**/${{ matrix.build }}/*.dll
             !${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/${{ matrix.build }}/test_*.exe
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: |
@@ -122,9 +122,9 @@
     name: "mingw unittest ${{ matrix.test }} - ${{ matrix.arch }} - ${{ matrix.build }} - OSSL"
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Retrieve mingw unittest
-        uses: actions/[email protected]... # v6.0.0
+        uses: actions/[email protected]... # v7.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: unittests
@@ -161,7 +161,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html libcmocka-dev python3-docutils libtool automake autoconf ${SSLPKG} ${PKCS11PKG}
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -191,7 +191,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -231,7 +231,7 @@
       - name: Install dependencies
         run: brew install ${{matrix.ssllib}} lzo lz4 man2html cmocka libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Set environment
         run: |
           cat >>$GITHUB_ENV <<EOF;
@@ -263,8 +263,8 @@
 
       runs-on: windows-2025
       steps:
-      - uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
 
       - name: Install rst2html
         run: python -m pip install --upgrade pip docutils
@@ -272,7 +272,7 @@
       - name: Restore artifacts, or setup vcpkg (do not install any package)
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/windows/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest (NO TESTS)
@@ -291,7 +291,7 @@
           testPreset: win-${{ matrix.arch }}-release
           testPresetAdditionalArgs: "['--output-on-failure']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-msvc-${{ matrix.arch }}
           path: |
@@ -331,7 +331,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "libressl: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: libressl
           # versioning=semver-coerced
@@ -354,7 +354,7 @@
       - name: "ldconfig"
         run: sudo ldconfig
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -395,7 +395,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "mbedtls: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: mbedtls
           submodules: true
@@ -409,7 +409,7 @@
         run: sudo make install DESTDIR=/usr
         working-directory: mbedtls
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -454,13 +454,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y gcc golang make liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "AWS-LC: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: aws-lc
           # versioning=semver-coerced
           repository: aws/aws-lc
-          ref: v1.64.0
-      - uses: lukka/[email protected]... # v4.1.2
+          ref: v1.66.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: "AWS-LC: build"
         run: |
           mkdir build
@@ -469,7 +469,7 @@
           ninja install
         working-directory: aws-lc
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure with AWS-LC
.github/workflows/coverity-scan.yml +3 -3
index fa18115..f329482 100644
@@ -13,7 +13,7 @@
     steps:
       - name: Check submission cache
         id: check_submit
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
@@ -25,7 +25,7 @@
 
       - name: Checkout OpenVPN
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
       - name: Download Coverity Build Tool
         if: steps.check_submit.outputs.cache-hit != 'true'
@@ -65,7 +65,7 @@
 
       - name: Cache submission
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
.github/workflows/doxygen.yml +1 -1
index 0828dd0..b510dc8 100644
@@ -11,7 +11,7 @@
     runs-on: ubuntu-24.04
     if: ${{ github.repository_owner == 'openvpn' || github.event_name == 'workflow_dispatch' }}
     steps:
-      - uses: actions/[email protected]... # v5.0.1
+      - uses: actions/[email protected]... # v6.0.1
         with:
           path: openvpn
 

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email

Gerrit-MessageType: newchange
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I637cc37f82d96a7d15738cc39523664777714e97
Gerrit-Change-Number: 1455
Gerrit-PatchSet: 1
Gerrit-Owner: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>

#2 lore raw
In reply to a message not in the archive

Attention is currently required from: flichtenheld, plaisthos.

uddr has posted comments on this change by flichtenheld. ( http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email )

Change subject: GHA: Maintenance update January 2026
......................................................................

Patch Set 1: Code-Review+2

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email

Gerrit-MessageType: comment
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I637cc37f82d96a7d15738cc39523664777714e97
Gerrit-Change-Number: 1455
Gerrit-PatchSet: 1
Gerrit-Owner: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-Reviewer: uddr <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>
Gerrit-Attention: plaisthos <[email protected]...>
Gerrit-Attention: flichtenheld <[email protected]...>
Gerrit-Comment-Date: Wed, 07 Jan 2026 16:29:07 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes

#3 lore raw

PATCH 1/1 GHA: Maintenance update January 2026

In reply to a message not in the archive

From: Frank Lichtenheld <[email protected]...>

Includes the following renovate changes:
- chore(deps): update dependency aws/aws-lc to v1.66.2
- Update lukka/get-cmake action to v4.2.1
- chore(deps): update github actions
- chore(deps): update vcpkg digest to eeb00f1

Change-Id I637cc37f82d96a7d15738cc39523664777714e97

Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1455
---

This change was reviewed on Gerrit and approved by at least one developer. I request to merge it to master.

Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1455
This mail reflects revision 1 of this Change.

Acked-by according to Gerrit (reflected above):
Yuriy Darnobyt <[email protected]...>

.github/workflows/build.yaml +27 -27
index 11c2d65..d1322c7 100644
@@ -14,12 +14,12 @@
           sudo apt update && sudo apt install -y python3-pip
           pip3 install pre-commit
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Run clang-format
         run: pre-commit run -a --show-diff-on-failure || true
       - name: Check for changes
         run: git diff --output=format-changes.patch
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: format-changes.patch
           path: format-changes.patch
@@ -44,12 +44,12 @@
       VCPKG_INSTALLED_DIR: ${{ github.workspace }}/vcpkg/installed
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+        uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
       - name: Install dependencies
         run: ${VCPKG_ROOT}/vcpkg install openssl lz4 cmocka
       - name: configure OpenVPN with cmake
@@ -78,13 +78,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y mingw-w64 unzip build-essential wget python3-docutils man2html-base
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Restore from cache and install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/mingw/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest
@@ -94,7 +94,7 @@
           buildPreset: mingw-${{ matrix.arch }}
           buildPresetAdditionalArgs: "['--config ${{ matrix.build }}']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}
           path: |
@@ -102,7 +102,7 @@
             ${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/**/${{ matrix.build }}/*.dll
             !${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/${{ matrix.build }}/test_*.exe
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: |
@@ -122,9 +122,9 @@
     name: "mingw unittest ${{ matrix.test }} - ${{ matrix.arch }} - ${{ matrix.build }} - OSSL"
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Retrieve mingw unittest
-        uses: actions/[email protected]... # v6.0.0
+        uses: actions/[email protected]... # v7.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: unittests
@@ -161,7 +161,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html libcmocka-dev python3-docutils libtool automake autoconf ${SSLPKG} ${PKCS11PKG}
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -191,7 +191,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -231,7 +231,7 @@
       - name: Install dependencies
         run: brew install ${{matrix.ssllib}} lzo lz4 man2html cmocka libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Set environment
         run: |
           cat >>$GITHUB_ENV <<EOF;
@@ -263,8 +263,8 @@
 
       runs-on: windows-2025
       steps:
-      - uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
 
       - name: Install rst2html
         run: python -m pip install --upgrade pip docutils
@@ -272,7 +272,7 @@
       - name: Restore artifacts, or setup vcpkg (do not install any package)
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/windows/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest (NO TESTS)
@@ -291,7 +291,7 @@
           testPreset: win-${{ matrix.arch }}-release
           testPresetAdditionalArgs: "['--output-on-failure']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-msvc-${{ matrix.arch }}
           path: |
@@ -331,7 +331,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "libressl: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: libressl
           # versioning=semver-coerced
@@ -354,7 +354,7 @@
       - name: "ldconfig"
         run: sudo ldconfig
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -395,7 +395,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "mbedtls: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: mbedtls
           submodules: true
@@ -409,7 +409,7 @@
         run: sudo make install DESTDIR=/usr
         working-directory: mbedtls
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -454,13 +454,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y gcc golang make liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "AWS-LC: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: aws-lc
           # versioning=semver-coerced
           repository: aws/aws-lc
-          ref: v1.64.0
-      - uses: lukka/[email protected]... # v4.1.2
+          ref: v1.66.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: "AWS-LC: build"
         run: |
           mkdir build
@@ -469,7 +469,7 @@
           ninja install
         working-directory: aws-lc
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure with AWS-LC
.github/workflows/coverity-scan.yml +3 -3
index fa18115..f329482 100644
@@ -13,7 +13,7 @@
     steps:
       - name: Check submission cache
         id: check_submit
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
@@ -25,7 +25,7 @@
 
       - name: Checkout OpenVPN
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
       - name: Download Coverity Build Tool
         if: steps.check_submit.outputs.cache-hit != 'true'
@@ -65,7 +65,7 @@
 
       - name: Cache submission
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
.github/workflows/doxygen.yml +1 -1
index 0828dd0..b510dc8 100644
@@ -11,7 +11,7 @@
     runs-on: ubuntu-24.04
     if: ${{ github.repository_owner == 'openvpn' || github.event_name == 'workflow_dispatch' }}
     steps:
-      - uses: actions/[email protected]... # v5.0.1
+      - uses: actions/[email protected]... # v6.0.1
         with:
           path: openvpn
 
#4 lore raw

[Openvpn-devel] [PATCH applied] Re: GHA: Maintenance update January 2026

Build dependency updates, no code changes... verified on my GH repo.

Your patch has been applied to the master branch.

commit 13e339e976458d6c527fd40dcbc89c5b4636fd30

Author: Frank Lichtenheld
Date:   Wed Jan 7 18:33:56 2026 +0100
     GHA: Maintenance update January 2026

     Signed-off-by: Frank Lichtenheld <[email protected]...>
     Acked-by: Yuriy Darnobyt <[email protected]...>
     Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1455
     Message-Id: <[email protected]...>
     URL: https://www.mail-archive.com/[email protected]/msg35175.html
     Signed-off-by: Gert Doering <[email protected]...>

--
kind regards,

Gert Doering

#5 lore raw
In reply to a message not in the archive

cron2 has uploaded a new patch set (#2) to the change originally created by flichtenheld. ( http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email )

The following approvals got outdated and were removed:
Code-Review+2 by uddr

Change subject: GHA: Maintenance update January 2026
......................................................................

GHA: Maintenance update January 2026

Includes the following renovate changes:
- chore(deps): update dependency aws/aws-lc to v1.66.2
- Update lukka/get-cmake action to v4.2.1
- chore(deps): update github actions
- chore(deps): update vcpkg digest to eeb00f1

Change-Id I637cc37f82d96a7d15738cc39523664777714e97

Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1455
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg35175.html

---
M .github/workflows/build.yaml
M .github/workflows/coverity-scan.yml
M .github/workflows/doxygen.yml

3 files changed, 31 insertions(+), 31 deletions(-)

git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/55/1455/2

.github/workflows/build.yaml +27 -27
index 11c2d65..d1322c7 100644
@@ -14,12 +14,12 @@
           sudo apt update && sudo apt install -y python3-pip
           pip3 install pre-commit
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Run clang-format
         run: pre-commit run -a --show-diff-on-failure || true
       - name: Check for changes
         run: git diff --output=format-changes.patch
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: format-changes.patch
           path: format-changes.patch
@@ -44,12 +44,12 @@
       VCPKG_INSTALLED_DIR: ${{ github.workspace }}/vcpkg/installed
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+        uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
       - name: Install dependencies
         run: ${VCPKG_ROOT}/vcpkg install openssl lz4 cmocka
       - name: configure OpenVPN with cmake
@@ -78,13 +78,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y mingw-w64 unzip build-essential wget python3-docutils man2html-base
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Restore from cache and install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/mingw/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest
@@ -94,7 +94,7 @@
           buildPreset: mingw-${{ matrix.arch }}
           buildPresetAdditionalArgs: "['--config ${{ matrix.build }}']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}
           path: |
@@ -102,7 +102,7 @@
             ${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/**/${{ matrix.build }}/*.dll
             !${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/${{ matrix.build }}/test_*.exe
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: |
@@ -122,9 +122,9 @@
     name: "mingw unittest ${{ matrix.test }} - ${{ matrix.arch }} - ${{ matrix.build }} - OSSL"
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Retrieve mingw unittest
-        uses: actions/[email protected]... # v6.0.0
+        uses: actions/[email protected]... # v7.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: unittests
@@ -161,7 +161,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html libcmocka-dev python3-docutils libtool automake autoconf ${SSLPKG} ${PKCS11PKG}
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -191,7 +191,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -231,7 +231,7 @@
       - name: Install dependencies
         run: brew install ${{matrix.ssllib}} lzo lz4 man2html cmocka libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Set environment
         run: |
           cat >>$GITHUB_ENV <<EOF;
@@ -263,8 +263,8 @@
 
       runs-on: windows-2025
       steps:
-      - uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
 
       - name: Install rst2html
         run: python -m pip install --upgrade pip docutils
@@ -272,7 +272,7 @@
       - name: Restore artifacts, or setup vcpkg (do not install any package)
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/windows/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest (NO TESTS)
@@ -291,7 +291,7 @@
           testPreset: win-${{ matrix.arch }}-release
           testPresetAdditionalArgs: "['--output-on-failure']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-msvc-${{ matrix.arch }}
           path: |
@@ -331,7 +331,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "libressl: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: libressl
           # versioning=semver-coerced
@@ -354,7 +354,7 @@
       - name: "ldconfig"
         run: sudo ldconfig
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -395,7 +395,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "mbedtls: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: mbedtls
           submodules: true
@@ -409,7 +409,7 @@
         run: sudo make install DESTDIR=/usr
         working-directory: mbedtls
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -454,13 +454,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y gcc golang make liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "AWS-LC: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: aws-lc
           # versioning=semver-coerced
           repository: aws/aws-lc
-          ref: v1.64.0
-      - uses: lukka/[email protected]... # v4.1.2
+          ref: v1.66.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: "AWS-LC: build"
         run: |
           mkdir build
@@ -469,7 +469,7 @@
           ninja install
         working-directory: aws-lc
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure with AWS-LC
.github/workflows/coverity-scan.yml +3 -3
index fa18115..f329482 100644
@@ -13,7 +13,7 @@
     steps:
       - name: Check submission cache
         id: check_submit
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
@@ -25,7 +25,7 @@
 
       - name: Checkout OpenVPN
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
       - name: Download Coverity Build Tool
         if: steps.check_submit.outputs.cache-hit != 'true'
@@ -65,7 +65,7 @@
 
       - name: Cache submission
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
.github/workflows/doxygen.yml +1 -1
index 0828dd0..b510dc8 100644
@@ -11,7 +11,7 @@
     runs-on: ubuntu-24.04
     if: ${{ github.repository_owner == 'openvpn' || github.event_name == 'workflow_dispatch' }}
     steps:
-      - uses: actions/[email protected]... # v5.0.1
+      - uses: actions/[email protected]... # v6.0.1
         with:
           path: openvpn
 

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email

Gerrit-MessageType: newpatchset
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I637cc37f82d96a7d15738cc39523664777714e97
Gerrit-Change-Number: 1455
Gerrit-PatchSet: 2
Gerrit-Owner: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-Reviewer: uddr <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>

#6 lore raw
In reply to a message not in the archive

cron2 has submitted this change. ( http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email )

Change subject: GHA: Maintenance update January 2026
......................................................................

GHA: Maintenance update January 2026

Includes the following renovate changes:
- chore(deps): update dependency aws/aws-lc to v1.66.2
- Update lukka/get-cmake action to v4.2.1
- chore(deps): update github actions
- chore(deps): update vcpkg digest to eeb00f1

Change-Id I637cc37f82d96a7d15738cc39523664777714e97

Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1455
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg35175.html

---
M .github/workflows/build.yaml
M .github/workflows/coverity-scan.yml
M .github/workflows/doxygen.yml

3 files changed, 31 insertions(+), 31 deletions(-)
.github/workflows/build.yaml +27 -27
index 11c2d65..d1322c7 100644
@@ -14,12 +14,12 @@
           sudo apt update && sudo apt install -y python3-pip
           pip3 install pre-commit
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Run clang-format
         run: pre-commit run -a --show-diff-on-failure || true
       - name: Check for changes
         run: git diff --output=format-changes.patch
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: format-changes.patch
           path: format-changes.patch
@@ -44,12 +44,12 @@
       VCPKG_INSTALLED_DIR: ${{ github.workspace }}/vcpkg/installed
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+        uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
       - name: Install dependencies
         run: ${VCPKG_ROOT}/vcpkg install openssl lz4 cmocka
       - name: configure OpenVPN with cmake
@@ -78,13 +78,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y mingw-w64 unzip build-essential wget python3-docutils man2html-base
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: Restore from cache and install vcpkg
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/mingw/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest
@@ -94,7 +94,7 @@
           buildPreset: mingw-${{ matrix.arch }}
           buildPresetAdditionalArgs: "['--config ${{ matrix.build }}']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}
           path: |
@@ -102,7 +102,7 @@
             ${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/**/${{ matrix.build }}/*.dll
             !${{ github.workspace }}/out/build/mingw/${{ matrix.arch }}/${{ matrix.build }}/test_*.exe
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: |
@@ -122,9 +122,9 @@
     name: "mingw unittest ${{ matrix.test }} - ${{ matrix.arch }} - ${{ matrix.build }} - OSSL"
     steps:
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Retrieve mingw unittest
-        uses: actions/[email protected]... # v6.0.0
+        uses: actions/[email protected]... # v7.0.0
         with:
           name: openvpn-mingw-${{ matrix.arch }}-${{ matrix.build }}-tests
           path: unittests
@@ -161,7 +161,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html libcmocka-dev python3-docutils libtool automake autoconf ${SSLPKG} ${PKCS11PKG}
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -191,7 +191,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -231,7 +231,7 @@
       - name: Install dependencies
         run: brew install ${{matrix.ssllib}} lzo lz4 man2html cmocka libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: Set environment
         run: |
           cat >>$GITHUB_ENV <<EOF;
@@ -263,8 +263,8 @@
 
       runs-on: windows-2025
       steps:
-      - uses: actions/[email protected]... # v5.0.1
-      - uses: lukka/[email protected]... # v4.1.2
+      - uses: actions/[email protected]... # v6.0.1
+      - uses: lukka/[email protected]... # v4.2.1
 
       - name: Install rst2html
         run: python -m pip install --upgrade pip docutils
@@ -272,7 +272,7 @@
       - name: Restore artifacts, or setup vcpkg (do not install any package)
         uses: lukka/[email protected]... # v11.5
         with:
-          vcpkgGitCommitId: 3bbc2809d3625cb83a0d7cbd413bd6ad769d46d4
+          vcpkgGitCommitId: eeb00f1ecba68f68fad6a1ee93eec77921b3146e
           vcpkgJsonGlob: '**/windows/vcpkg.json'
 
       - name: Run CMake with vcpkg.json manifest (NO TESTS)
@@ -291,7 +291,7 @@
           testPreset: win-${{ matrix.arch }}-release
           testPresetAdditionalArgs: "['--output-on-failure']"
 
-      - uses: actions/[email protected]... # v5.0.0
+      - uses: actions/[email protected]... # v6.0.0
         with:
           name: openvpn-msvc-${{ matrix.arch }}
           path: |
@@ -331,7 +331,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "libressl: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: libressl
           # versioning=semver-coerced
@@ -354,7 +354,7 @@
       - name: "ldconfig"
         run: sudo ldconfig
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -395,7 +395,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "mbedtls: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: mbedtls
           submodules: true
@@ -409,7 +409,7 @@
         run: sudo make install DESTDIR=/usr
         working-directory: mbedtls
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -454,13 +454,13 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y gcc golang make liblzo2-dev libpam0g-dev liblz4-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils python3-jinja2 python3-jsonschema libtool automake autoconf pkg-config libcap-ng-dev libnl-genl-3-dev
       - name: "AWS-LC: checkout"
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
         with:
           path: aws-lc
           # versioning=semver-coerced
           repository: aws/aws-lc
-          ref: v1.64.0
-      - uses: lukka/[email protected]... # v4.1.2
+          ref: v1.66.2
+      - uses: lukka/[email protected]... # v4.2.1
       - name: "AWS-LC: build"
         run: |
           mkdir build
@@ -469,7 +469,7 @@
           ninja install
         working-directory: aws-lc
       - name: Checkout OpenVPN
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
       - name: autoconf
         run: autoreconf -fvi
       - name: configure with AWS-LC
.github/workflows/coverity-scan.yml +3 -3
index fa18115..f329482 100644
@@ -13,7 +13,7 @@
     steps:
       - name: Check submission cache
         id: check_submit
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
@@ -25,7 +25,7 @@
 
       - name: Checkout OpenVPN
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/[email protected]... # v5.0.1
+        uses: actions/[email protected]... # v6.0.1
 
       - name: Download Coverity Build Tool
         if: steps.check_submit.outputs.cache-hit != 'true'
@@ -65,7 +65,7 @@
 
       - name: Cache submission
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/cache/[email protected]... # v4.3.0
+        uses: actions/cache/[email protected]... # v5.0.1
         with:
           path: |
             cov-int
.github/workflows/doxygen.yml +1 -1
index 0828dd0..b510dc8 100644
@@ -11,7 +11,7 @@
     runs-on: ubuntu-24.04
     if: ${{ github.repository_owner == 'openvpn' || github.event_name == 'workflow_dispatch' }}
     steps:
-      - uses: actions/[email protected]... # v5.0.1
+      - uses: actions/[email protected]... # v6.0.1
         with:
           path: openvpn
 

--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1455?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email

Gerrit-MessageType: merged
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I637cc37f82d96a7d15738cc39523664777714e97
Gerrit-Change-Number: 1455
Gerrit-PatchSet: 2
Gerrit-Owner: flichtenheld <[email protected]...>
Gerrit-Reviewer: plaisthos <[email protected]...>
Gerrit-Reviewer: uddr <[email protected]...>
Gerrit-CC: openvpn-devel <[email protected]>